newb question -

The forum for help and support with FreeNATS as well as any useful hints and tips
Post Reply
PriapisticMonk
Posts: 2
Joined: Wed Mar 23, 2011 9:46 pm

newb question -

Post by PriapisticMonk » Wed Mar 23, 2011 9:53 pm

I did some experimenting with service tests and one came back failed, it emailed me (great!). I removed the test but the node still shows up as failed and red. How would I go about clearing that out and starting over without starting all over, if you know what I mean?

Great app, by the way.

Thanks,
Dan

PriapisticMonk
Posts: 2
Joined: Wed Mar 23, 2011 9:46 pm

Re: newb question -

Post by PriapisticMonk » Thu Mar 24, 2011 5:17 pm

Okay I figured it out, running the clearalerts.sh script from /bin did the trick. I'm going to add a button so my users won't have to get scared by the scary command line.

Thanks for the assist. :roll:

dave
Site Admin
Posts: 260
Joined: Fri May 30, 2008 9:09 pm
Location: UK
Contact:

Re: newb question -

Post by dave » Thu Mar 31, 2011 9:22 am

Hi,

Sorry for the delay in responding as I've been away.

Glad you've got it resolved but I do think there may be a way in the interface already - I'll try and find some time to take a look (certainly if not then it's a good idea to implement one).

Will post here what I find.

Regards,

Dave.

Post Reply